This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Thagard, J. R. Articles by Liang, Z. Search for Related Content Social Bookmarking                         What's this?

Resin Infusion Between Double Flexible Tooling: Evaluation of Process Parameters

Department of Industrial & Manufacturing Engineering, Florida A&M University – Florida State University College of Engineering, 2525 Pottsdamer Street, Tallahassee, Florida 32310, USA

O. I. Okoli

Department of Industrial & Manufacturing Engineering, Florida A&M University – Florida State University College of Engineering, 2525 Pottsdamer Street, Tallahassee, Florida 32310, USAokoli{at}eng.fsu.edu

Z. Liang

Department of Industrial & Manufacturing Engineering, Florida A&M University – Florida State University College of Engineering, 2525 Pottsdamer Street, Tallahassee, Florida 32310, USA

Manufacturers of lean weight vehicular structures are discovering the advantages of utilizing the high strength to weight ratios found in composite materials. However, traditional closed mold techniques require a long cycle time and relatively expensive tooling. This paper reports on a new technique called Resin Infusion between Double Flexible Tooling (RIDFT). In this innovative process, the resin infusion and resin-fiber wetting are finished between two flexible tools in a two dimensional flat shape and then the entire wetted reinforcement and flexible tooling is formed into a specified part shape by using a vacuum. This process avoids complex resin flow and mold filling issues and saves mold preparation and fiber stacking time. Using a RIDFT prototype, several components were produced. A larger industrial RIDFT machine was constructed to establish its viability for large component manufacture. An evaluation of production parameters, including infusion pressure, resin temperature, number of fiber layers and hardener content, ascertained their effect on mechanical properties and infusion times for the manufactured parts. The interaction between the hardener and fiber layers were found to directly affect tensile strength. The interaction between hardener and infusion pressure was also shown to affect tensile strength.

Key Words: composites processing • resin infusion • mechanical properties

Journal of Reinforced Plastics and Composites, Vol. 23, No. 16, 1767-1778 (2004)
DOI: 10.1177/0731684404041148


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?